5 Timer Cycles Small Ultrasonic Cleaner Machine Digital GT SONIC 40kHz 600ml
Watch Cleaning Machine Features:
1. Use tap water for cleaning.
2. Practical and classic design.
3. 5 timer cycles to set.
4. Moisture-proofed and anti-corrosion PCB, more durable.
5. Special use for promotion preject .
Watch Cleaning Machine:
The watch cleaning machine process provides high quality cleaning and exceeds, by ease of use and end result, conventional cleaning methods. The tiny microscopic bubbles generated by the transducers provide cleaning of very difficult, irregular and complex parts. Even inaccessible areas can be cleaned without any trace of physical cleaning (scratches, etc...).
Applications:
Jewelry and Watches: Necklaces, Earrings, Rings, Bracelets, Coins, Watch Straps and Bands etc.
Eye Care: Glasses, Sunglasses, Contact Lens Accessories.
Daily Personal Care: Dentures, Combs, Toothbrushes, Table Wares.
Specifications:
Model | VGT-2000 |
Ultrasonic Frequency | 40 KHz |
Tank Material | Stainless Steel SUS304 |
Tank Capacity | 600 ml |
Timer | 90s,180s,280s,380s,480s |
Power Supply | AC100~120V, 60Hz
AC220~240V, 50Hz |
Power | 35W |
Tank Size(mm) | 155×95×52mm (L×W×H) |
Overall Size(mm) | 200×140×125mm (L×W×H) |
N.W. | 0.9 kgs |
G.W. | 1.1 kgs |
Our Company:
Guangdong GT Ultrasonic Co.,Ltd(Stock code:832018), established in 2007, is a national high-tech enterprise integrating Ultrasonic application technology research, product production, sales and high-power Ultrasonic processing engineering services. The company was listed on the New Third Board Market in 2015 with stock code 832018. It is also the first listed company in this industry. Industrial area covers an area of 40,000 square meters. The products are divided into three categories: Household Ultrasonic cleaning machine, Standard commercial desktop cleaning machine, Industrial machine.
Our Service:
12 months warranty for GTSONIC neutral Ultrasonic cleaner , 18 months for Brand products .
If any technical problem during warranty time, replacement parts will be sent free of charge. Technical support is also available after warranty time.
Advantage:
1, Reply your enquiry in 24 working hours.
2, Experienced staffs answer all your questions in fluent English.
3, OEM is available if the quantity is large.
4, We offer very competitive for all our products.
5, The most important thing is that our product of quality, our design is innovative,we choose industrial grade quality circuit board,we have advanced production line and have very strict quality control procedures, the failure rate is less than 3%, which is the lowest in this line.
FAQ:
1. What's the best cleaning temperature?
To get the best cleaning result, the solution’s temperature we suggest is 40-60℃. Warm water and dish washing liquid can soften grease and improve cleaning result.It's important however to make sure these temperatures are safe for your parts before cleaning.
2. What is Ultrasonic?
Ultrasonic is sound generated beyond human audible level. In real life, high pitch sound is created by high frequency, and alternatively, the low and base tone is created by low frequency. Frequencies above 16 kHz in general are being considered as Ultrasonic. Typical Ultrasonic frequencies used for cleaning purpose are from 20 kHz to 80 kHz.
3. What can I not clean?
There is very little, but if you have any doubt we strongly recommend you contact manufacturer of the item you want to clean first. However we do know that we would not recommend the following without getting approval from the manufacturer first: Some precious stones eg, emeralds Some plastics some plastics are porous and the Ultrasonic cleaning can cause some whitening.
